NLBrute 1.2 x64 VPN Edition+ KeyGen - [Cracked By PC-RET]

[Venomthegoat]

NLBrute 1.2 x64 VPN Edition + KeyGen
https://cache.nulled...tuF/SJBVI2k.png
https://cache.nulled...REF/zGuoiQG.pngFeatures:
- Brute dedicated, which installed the OS version of Vista and above (all that supports NLA)
- Stable operation with a large number of threads (500 and higher)
- Relatively high speed of brute (depends primarily on the outgoing speed of the Internet), in this case, the brute went at a speed of ~ 5/5 Mbit
- Brutus is launched on any version of Windows since XP / 2003
- Does not require the installation of any libraries
- Supports Unicode for authorization and templates% username%,% USERNAME%
- In the event of a malfunction, work is possible from the point where Brutus stopped
- Low system requirements
- When working, does not create any unnecessary processes
- Brutus goes on the list of servers, that is, first comes the brute of all the servers in the list for the first pair of login, the password, then the second one, and so on, which avoids possible blockages on the part of the servers
- Supports non-standard ports (you can submit to the input lines of the form 123.168.45.4:3390)
- Works only on x64 bit platforms
 
 

Information about this version of software:
1) There was support for empty passwords
2) Now brute automatically identifies domains, for example:
80.152.71.59@ACPSOLUTIONSLTD \ Administrator; P @ ssw0rd
77.105.143.132@UM \ Administrator; password
3) For those who use the masscan scanner, you can immediately download scan results to brute, without prior parsing.
4) Small changes in performance
5) Now you can minimize to the tray
6) You can disable the server list check during the brute, in case you download a staked list
7) It is possible to select the default RDP port if server lists without ports are loaded (the default port was 3389)
8) Reset the brute, if you want to start brute again, without loading the ip / user / password lists again
 
Startup Instruction:
1. Unzip the downloaded archive into any folder on your disk.
2. Run the executable file, a window for activating the program appears before you.
 
 
Download free :
 

thanks bro

[jonah97822]

thanks

[FedeHioz]

NLBrute 1.2 x64 VPN Edition + KeyGen
https://cache.nulled...tuF/SJBVI2k.png
https://cache.nulled...REF/zGuoiQG.pngFeatures:
- Brute dedicated, which installed the OS version of Vista and above (all that supports NLA)
- Stable operation with a large number of threads (500 and higher)
- Relatively high speed of brute (depends primarily on the outgoing speed of the Internet), in this case, the brute went at a speed of ~ 5/5 Mbit
- Brutus is launched on any version of Windows since XP / 2003
- Does not require the installation of any libraries
- Supports Unicode for authorization and templates% username%,% USERNAME%
- In the event of a malfunction, work is possible from the point where Brutus stopped
- Low system requirements
- When working, does not create any unnecessary processes
- Brutus goes on the list of servers, that is, first comes the brute of all the servers in the list for the first pair of login, the password, then the second one, and so on, which avoids possible blockages on the part of the servers
- Supports non-standard ports (you can submit to the input lines of the form 123.168.45.4:3390)
- Works only on x64 bit platforms
 
 

Information about this version of software:
1) There was support for empty passwords
2) Now brute automatically identifies domains, for example:
80.152.71.59@ACPSOLUTIONSLTD \ Administrator; P @ ssw0rd
77.105.143.132@UM \ Administrator; password
3) For those who use the masscan scanner, you can immediately download scan results to brute, without prior parsing.
4) Small changes in performance
5) Now you can minimize to the tray
6) You can disable the server list check during the brute, in case you download a staked list
7) It is possible to select the default RDP port if server lists without ports are loaded (the default port was 3389)
8) Reset the brute, if you want to start brute again, without loading the ip / user / password lists again
 
Startup Instruction:
1. Unzip the downloaded archive into any folder on your disk.
2. Run the executable file, a window for activating the program appears before you.
 
 
Download free :
 

Liked

[guraba05]

thx

 

NLBrute 1.2 x64 VPN Edition + KeyGen
https://cache.nulled...tuF/SJBVI2k.png
https://cache.nulled...REF/zGuoiQG.pngFeatures:
- Brute dedicated, which installed the OS version of Vista and above (all that supports NLA)
- Stable operation with a large number of threads (500 and higher)
- Relatively high speed of brute (depends primarily on the outgoing speed of the Internet), in this case, the brute went at a speed of ~ 5/5 Mbit
- Brutus is launched on any version of Windows since XP / 2003
- Does not require the installation of any libraries
- Supports Unicode for authorization and templates% username%,% USERNAME%
- In the event of a malfunction, work is possible from the point where Brutus stopped
- Low system requirements
- When working, does not create any unnecessary processes
- Brutus goes on the list of servers, that is, first comes the brute of all the servers in the list for the first pair of login, the password, then the second one, and so on, which avoids possible blockages on the part of the servers
- Supports non-standard ports (you can submit to the input lines of the form 123.168.45.4:3390)
- Works only on x64 bit platforms
 
 

Information about this version of software:
1) There was support for empty passwords
2) Now brute automatically identifies domains, for example:
80.152.71.59@ACPSOLUTIONSLTD \ Administrator; P @ ssw0rd
77.105.143.132@UM \ Administrator; password
3) For those who use the masscan scanner, you can immediately download scan results to brute, without prior parsing.
4) Small changes in performance
5) Now you can minimize to the tray
6) You can disable the server list check during the brute, in case you download a staked list
7) It is possible to select the default RDP port if server lists without ports are loaded (the default port was 3389)
8) Reset the brute, if you want to start brute again, without loading the ip / user / password lists again
 
Startup Instruction:
1. Unzip the downloaded archive into any folder on your disk.
2. Run the executable file, a window for activating the program appears before you.
 
 
Download free :
 

 

[LordAK1]

thanks

 

[Famelin]

Hope it works

[Trillhitta]

god i hope this works

[richssoa]

dick head

 

[hackerop444]

op

[Maona1]

tyyyy